Kitchen cabinets are a little more complex than some people think. While finding the best-looking cabinetry is important, that’s only half the battle.
You also need cabinets made from the finest materials by experienced craftsmen. If you are looking for new kitchen cabinets, remember these tips when you go shopping…
What to Look for When Buying Kitchen Cabinets
Look at the Paint and Finish
The paint and finish on your cabinets may be the most important part, especially if you are concerned with creating the best possible look for your kitchen. When you are buying custom kitchen cabinets, ask about the company’s painting department. What brands of paint do they use? What is their prep and painting process? How many coats do they apply? How do they seal the paint?
Every part and component should be given the royal treatment, delivering a quality product that looks great inside and out. This should include the drawer boxes, which should be sanded and sprayed with a clear coat on the inside and outside.
Look at the Inside of the Cabinets and Drawers
The cabinets may look fantastic, but how does it feel? Do the drawers roll out smoothly? Use your hands to feel around the drawer box on the edges, around the joints, and along the side walls. They should feel sanded and smooth, with no rough surfaces, splintering, or sharpness of any kind. Essentially, they should be finely sanded so they don’t feel like raw material.
The Type of Stock You Should Find
All of the shelves, no matter what their intended purpose, should be 3/4-inch stock, plywood, or MDF, which stands for Medium-Density Fiberboard. While you may think you can get by with 1/2-inch board for the shelves, this thinner material will eventually break down and sag over time. In the long run, it pays to go with high-quality 3/4-inch shelving.
What’s the Material and Thickness of the Visible Board?
The exterior material of the board should be extremely-high quality too. For the outside box, the cabinet should have 3/4-inch plywood, pre-finished wood, or stainable board. Drawer box side walls can be 1/2-inch to save space and weight, but there must be dove-tail joints on all four corners with no staples or glue joints. The door frames should be solid wood, while the bottom of the drawers should be plywood, which better resists sagging. The frames should be solid wood, with no MDF or face frames, and the plywood should be used for durability on the back of the cabinet box.
The Final Touch: High-Quality Hardware
If everything looks right, you should take a thorough look at the cabinet’s hardware, including handles, hinges, and braces. The cabinet should have quality corner braces for long-lasting stability, and clean hardware on the drawers and doors. It is always good to have self-closing drawers and doors, and there should be no duck-walking or wobbling in the opening. Adjustable self-closing hinges are always preferred, and full-extension glides should be used for better storage. All cabinets should be screwed together, and no staples should be used.
Get Quality Kitchen Cabinets from C & C Woodworking!
At C & C Woodworking, we use the highest standards for all of our products. When you have custom cabinets built from us, you’ll get soft-closing hinges, solid maple boxes with dove-tail joints, drawers that can receive a clear finish in the inside and out, and soft-close drawer slides.
Contact us today and let us help you get amazing cabinets to complete your kitchen!